 |
| Quantity: | |
|---|---|
Overview
Single screw pump is one of the important types of fluid transfer equipment used in various process industries, it is also referred to as eccentric screw pump, cavity pump or progressive cavity pump.
This pump is a positive displacement pump that transfers fluid amounts through cavities of several shape. The pump materials of construction will be based upon the application.
Bearing housing type single screw pumps are constructed with cast iron bearing housing. The driving shaft of pump is installed in the mentioned pedestal, it has enough strength to bear the torque and axial force produced by the rotor during the working process. The rotating parts are available in numerous materials like Alloy Steel, Tool Steel, Stainless Steel 304, 316, duplex etc. Its structure has strong load ability, good rigidity. It is usually used in high pressure working conditions.
Optimize design structure:
Beneficial Features:
• Wide application, it can be used for conveying of flowing materials, even non-flowing materials
• Continuous conveying, small pulsating quantity
• The media is not stirred in the pump and is free from squeezing and cutting
• The flow is in direct proportion to the rotating speed,variable output, measurement feeding
• High efficiency
• All fluids can be pumped with minimal agitation, separation, turbulence, and pulsation
• Easy maintenance
• High pressure capability
• Modular configuration
Meet your Transportation demands include:
• various sizes for flow rates up to 600 m³/h
• differential pressures up to 48 bar
• multiple flow-through metal materials configure: tool steel, duplex, Hastelloy and titanium
• multiple stator elastomers: NBR, EPDM, CSM, PTFE, Hydrogen NBR…
• standard mechanical seal, other seals optional
Strict quality standards and test procedures assure that you receive the best performing single screw pumps. Even after the initial sale we continue to provide support to ensure optimum performance in various service conditions.
Overview
Single screw pump is one of the important types of fluid transfer equipment used in various process industries, it is also referred to as eccentric screw pump, cavity pump or progressive cavity pump.
This pump is a positive displacement pump that transfers fluid amounts through cavities of several shape. The pump materials of construction will be based upon the application.
Bearing housing type single screw pumps are constructed with cast iron bearing housing. The driving shaft of pump is installed in the mentioned pedestal, it has enough strength to bear the torque and axial force produced by the rotor during the working process. The rotating parts are available in numerous materials like Alloy Steel, Tool Steel, Stainless Steel 304, 316, duplex etc. Its structure has strong load ability, good rigidity. It is usually used in high pressure working conditions.
Optimize design structure:
Beneficial Features:
• Wide application, it can be used for conveying of flowing materials, even non-flowing materials
• Continuous conveying, small pulsating quantity
• The media is not stirred in the pump and is free from squeezing and cutting
• The flow is in direct proportion to the rotating speed,variable output, measurement feeding
• High efficiency
• All fluids can be pumped with minimal agitation, separation, turbulence, and pulsation
• Easy maintenance
• High pressure capability
• Modular configuration
Meet your Transportation demands include:
• various sizes for flow rates up to 600 m³/h
• differential pressures up to 48 bar
• multiple flow-through metal materials configure: tool steel, duplex, Hastelloy and titanium
• multiple stator elastomers: NBR, EPDM, CSM, PTFE, Hydrogen NBR…
• standard mechanical seal, other seals optional
Strict quality standards and test procedures assure that you receive the best performing single screw pumps. Even after the initial sale we continue to provide support to ensure optimum performance in various service conditions.
