 |
| Quantity: | |
|---|---|
Overview
Single screw pump is one of the important types of fluid transfer equipment used in various process industries. It is also referred to as eccentric screw pump, cavity pump or progressive cavity pump.
This pump is a positive displacement pump that transfers fluid amounts through cavities of several shape. The pump materials of construction will be based upon the application.
Vertical single screw pump is usually constructed with direct coupling (remark: cast iron bearing housing is only used in high transferring vertical condition). Coupling rod and two gimbal joints are assembled for the transmission of power from the drive to the rotor. The driving shaft of pump is coupled with the driving motor, it has enough strength to bear the torque and axial force produced by the rotor during the working process. The rotating parts are available in numerous materials like Alloy Steel, Tool Steel, Stainless Steel 304, 316, duplex etc. Its structure has strong load ability, good rigidity. It is usually used to empty barrels, containers, tanks, sedimentation tanks, pits etc.
Optimize design structure:
Beneficial Features:
• Wide application, it can be used for conveying of flowing materials, even non-flowing materials
• small vertical assembled scope
• Continuous conveying, small pulsating quantity
• The media is not stirred in the pump and is free from squeezing and cutting
• The flow is in direct proportion to the rotating speed,variable output, measurement feeding
• High efficiency
• High suction capacity, no other feeding device required
• All fluids can be pumped with minimal agitation, separation, turbulence, and pulsation
• Easy maintenance, pull out to repair
• Modular configuration
Meet your Transportation demands include:
• various sizes for flow rates up to 200 m³/h
• differential pressures up to 24 bar
• vertical assembled site is limited
• multiple flow-through metal materials configure: tool steel, duplex, Hastelloy and titanium
• multiple stator elastomers: NBR, EPDM, CSM, PTFE, Hydrogen NBR…
Strict quality standards and test procedures assure that you receive the best performing single screw pumps. Even after the initial sale we continue to provide support to ensure optimum performance in various service conditions.
Overview
Single screw pump is one of the important types of fluid transfer equipment used in various process industries. It is also referred to as eccentric screw pump, cavity pump or progressive cavity pump.
This pump is a positive displacement pump that transfers fluid amounts through cavities of several shape. The pump materials of construction will be based upon the application.
Vertical single screw pump is usually constructed with direct coupling (remark: cast iron bearing housing is only used in high transferring vertical condition). Coupling rod and two gimbal joints are assembled for the transmission of power from the drive to the rotor. The driving shaft of pump is coupled with the driving motor, it has enough strength to bear the torque and axial force produced by the rotor during the working process. The rotating parts are available in numerous materials like Alloy Steel, Tool Steel, Stainless Steel 304, 316, duplex etc. Its structure has strong load ability, good rigidity. It is usually used to empty barrels, containers, tanks, sedimentation tanks, pits etc.
Optimize design structure:
Beneficial Features:
• Wide application, it can be used for conveying of flowing materials, even non-flowing materials
• small vertical assembled scope
• Continuous conveying, small pulsating quantity
• The media is not stirred in the pump and is free from squeezing and cutting
• The flow is in direct proportion to the rotating speed,variable output, measurement feeding
• High efficiency
• High suction capacity, no other feeding device required
• All fluids can be pumped with minimal agitation, separation, turbulence, and pulsation
• Easy maintenance, pull out to repair
• Modular configuration
Meet your Transportation demands include:
• various sizes for flow rates up to 200 m³/h
• differential pressures up to 24 bar
• vertical assembled site is limited
• multiple flow-through metal materials configure: tool steel, duplex, Hastelloy and titanium
• multiple stator elastomers: NBR, EPDM, CSM, PTFE, Hydrogen NBR…
Strict quality standards and test procedures assure that you receive the best performing single screw pumps. Even after the initial sale we continue to provide support to ensure optimum performance in various service conditions.
