 |
| Quantity: | |
|---|---|
Overview
Single screw pump is one of the important types of fluid transfer equipment used in various process industries, it is also referred to as eccentric screw pump, cavity pump or progressive cavity pump.
This pump is a positive displacement pump that transfers fluid amounts through cavities of several shape. The pump materials of construction will be based upon the application.
Close coupled type single screw pump is directly driven by gear motor, its structure is compact, the length of the pump is short. The driving shaft of pump is driven by gear motor’s axle, it has enough strength to bear the torque and axial force produced by the rotor during the working process. It is usually used in conventional pressure working conditions.
Optimize design structure:
Beneficial Features:
• Wide application, it can be used for conveying of flowing materials, even non-flowing materials
• Continuous conveying, small pulsating quantity
• The media is not stirred in the pump and is free from squeezing and cutting
• The flow is in direct proportion to the rotating speed,variable output, measurement feeding
• High efficiency
• All fluids can be pumped with minimal agitation, separation, turbulence, and pulsation
• Easy maintenance
Meet your Transportation demands include:
• various sizes for flow rates up to 400 m³/h
• differential pressures up to 24 bar
• multiple flow-through metal materials configure: tool steel, duplex, Hastelloy and titanium
• multiple stator elastomers: NBR, EPDM, CSM, PTFE, Hydrogen NBR…
• standard mechanical seal, other seals optional
Strict quality standards and test procedures assure that you receive the best performing single screw pumps. Even after the initial sale we continue to provide support to ensure optimum performance in various service conditions.
Overview
Single screw pump is one of the important types of fluid transfer equipment used in various process industries, it is also referred to as eccentric screw pump, cavity pump or progressive cavity pump.
This pump is a positive displacement pump that transfers fluid amounts through cavities of several shape. The pump materials of construction will be based upon the application.
Close coupled type single screw pump is directly driven by gear motor, its structure is compact, the length of the pump is short. The driving shaft of pump is driven by gear motor’s axle, it has enough strength to bear the torque and axial force produced by the rotor during the working process. It is usually used in conventional pressure working conditions.
Optimize design structure:
Beneficial Features:
• Wide application, it can be used for conveying of flowing materials, even non-flowing materials
• Continuous conveying, small pulsating quantity
• The media is not stirred in the pump and is free from squeezing and cutting
• The flow is in direct proportion to the rotating speed,variable output, measurement feeding
• High efficiency
• All fluids can be pumped with minimal agitation, separation, turbulence, and pulsation
• Easy maintenance
Meet your Transportation demands include:
• various sizes for flow rates up to 400 m³/h
• differential pressures up to 24 bar
• multiple flow-through metal materials configure: tool steel, duplex, Hastelloy and titanium
• multiple stator elastomers: NBR, EPDM, CSM, PTFE, Hydrogen NBR…
• standard mechanical seal, other seals optional
Strict quality standards and test procedures assure that you receive the best performing single screw pumps. Even after the initial sale we continue to provide support to ensure optimum performance in various service conditions.
